Straight answers about estimates, refinishing, stone polishing, water damage and choosing the right wood, from the family crew that does the work.
Call us 7 days a week or book a free in-home estimate.
Yes, we come to your home, inspect the floors, apply stain samples if needed and give you a written quote at no cost.
We serve homes across Greater Houston, including River Oaks, Tanglewood, Memorial and the Memorial Villages, West University Place, Bellaire and Uptown; the master-planned suburbs of The Woodlands, Sugar Land, Katy, Fulshear, Cypress, Kingwood, Missouri City, Pearland, Friendswood, Clear Lake, League City, Spring and Tomball; and out to Lake Conroe, Richmond, Rosenberg and Galveston. See every community we serve.
Yes, we are licensed and insured, and all of our work is guaranteed.
Never. Every job is done by our own family-owned crew.
Much less than you might expect. Our dust containment system captures dust at the source during sanding.
Yes, we are open 7 days a week, 8 am to 6 pm.
All work is guaranteed, and we offer a lifetime warranty on qualifying work. Ask for details during your estimate.
Dry-dust or vacuum often, use a cleaner made for finished wood floors, avoid steam mops and excess water, and use felt pads under furniture.
Most homes take a few days, depending on square footage, repairs and the finish system. We give you a day-by-day schedule before we start.
Often, yes, especially with our dust containment system. You will need to stay off the floors being finished while coats dry, and we plan rooms in an order that keeps your home usable where possible.
Usually, if the top wear layer is thick enough. We check it during the estimate. We have restored 25-year-old engineered floors that customers thought needed replacing.
Yes. A full sand takes the floor back to bare wood, so you can go lighter, darker or grey. We apply samples on your actual floor so you can see the color in your own light.
All of our work is guaranteed, and we offer a lifetime warranty on qualifying work, ask about the details during your estimate.
With a pH-neutral cleaner, felt pads on furniture and doormats at entries, a polished floor can look great for years. High-traffic areas may need a light maintenance polish over time.
Yes. Etching is surface damage, so honing removes it. Deep scratches may need grinding first.
Polished looks dramatic and reflects light; honed is softer, more slip-resistant and hides future etching. We can show you both on a test area.
We use a wet process, which keeps dust down. Slurry is contained and cleaned up as we go, and surrounding surfaces are masked.
Yes, stone floors and walls in bathrooms, plus vanity tops. Ask about it during your estimate.
It depends on traffic and how the floor is cleaned. Color sealing is the longest-lasting option; clear sealers benefit from periodic reapplication. We will recommend a schedule for your home.
Yes. Grout colorant can return grout to its original color or change it entirely, for example, from dated beige to a modern grey.
Yes, we use stone-safe, pH-appropriate products on marble, travertine and limestone, which can be damaged by acidic cleaners.
Usually the same day after cleaning. If we seal or color, we will tell you how long to wait before normal use.
Yes, shower walls, floors and benches, including mildew treatment and sealing.
Yes. In most homes we install new hardwood treads and risers over the existing stair structure. We check the framing during the estimate.
It depends on the number of steps and whether we are installing or refinishing. We give you a schedule up front and keep one route usable where possible.
That is the goal. When we refinish or install your floors and stairs together, we use the same stain and finish so they match.
A matte or satin finish offers more grip than gloss. Stair runners are also an option if you have pets or young children.
Yes, white or color-matched risers are one of our most popular looks.
Sometimes, partly, once the floor dries out fully. That is why we measure moisture before deciding whether to sand, repair or replace boards.
Light grey marks often sand out. Deep black stains usually go through the board, so we replace those boards and blend them in.
Rarely. Most water damage is local, and we replace only the affected boards, then refinish so everything matches.
Often, yes, if the core has not delaminated. We will assess the boards and source matching material when replacement is needed.
We provide a detailed estimate and photos for your adjuster. Your insurer decides coverage.
Yes. Granite is very hard, so it holds a polish well, but high-use areas still dull over time. Re-polishing restores the original shine.
It depends on the stone. A simple water test tells you: if water darkens the stone within a few minutes, it is time to reseal.
We color-match resin to your stone and shape it to the edge profile. Most repairs are very hard to spot.
Quartz is an engineered material and is not polished like natural stone. We can advise on cleaning and minor repairs during your estimate.
In most cases, yes, once the sealer has cured, which we will confirm before we leave.
Nearly all of it. Because the chips and color run through the full thickness, grinding exposes a fresh surface. Severely broken areas can be patched.
Repairs are color-matched to the surrounding matrix. Some cracks remain faintly visible, which many owners consider part of the floor’s character.
It depends on the square footage and how much uncovering and repair is needed. We will give you a schedule with your estimate.
Our focus is restoring existing terrazzo. Ask us about your project and we will advise on the best option.
Dust-mop often, use a pH-neutral cleaner, and avoid acidic or ammonia-based products. We will leave you a simple care guide.
Red oak usually has a pink or reddish cast and very open pores; white oak is more tan or olive with tighter grain. We can confirm during your estimate.
It can, but the warm undertone can show through. We always test on your floor first; white oak is often a better choice for true greys.
Standard solid oak flooring can typically be sanded several times over its lifetime. We check the remaining thickness before every refinish.
If you want a light, natural or grey floor, usually yes, it gives cleaner results with those colors than red oak. For warm, mid-to-dark stains, red oak is a great value alternative.
Both are cut to show straight grain. Quartersawn boards also show ray flecks; rift-sawn boards are the most uniform and linear.
Often. A full sand removes the old stain, and we can finish with a natural or lightening system. We will test samples first.
It’s one of the best hardwood choices for pets thanks to its hardness and natural variation. Pair it with a matte finish for the best scratch camouflage.
It can, but its density makes dark stains less uniform. Many owners prefer natural or light tones that celebrate the grain. We test samples first.
Yes. Solid hickory refinishes well; it takes more time to sand than oak because of its hardness.
Yes. The surface you walk on is real hardwood; only the core is different. It is not laminate or vinyl.
No hardwood is waterproof. Engineered is more stable with humidity, but standing water should still be wiped up quickly.
We will try to source the same or a close match, then blend it with refinishing where the wear layer allows.
Every estimate is done by our own crew. Ask anything. We’ll give you honest advice even if you’re not ready to start.